Protetic Dentistry 1 - B82074 (Zubní lékařství AP)

• Title: Protetické zubní lékařství 1
• Guaranteed by: Department of Dental Medicine First Faculty of Medicine Charles University and General University Hospital in Prague (11-00770)
• Faculty: First Faculty of Medicine
• Actual: from 2021
• Semester: winter
• Points: 4
• E-Credits: 4
• Examination process: winter s.:
• Hours per week, examination: winter s.:1/4, C [HT]
• Extent per academic year: 75 [hours]
• Capacity: unlimited
• Min. number of students: unlimited
• 4EU+: no
• Virtual mobility / capacity: no
• State of the course: not taught
• Language: English
• Teaching methods: full-time
• Teaching methods: full-time
• Explanation: doc. MUDr. Hana Hubálková, Ph.D.
• Guarantor: prof. MUDr. Jana Dušková, MBA, DrSc.
• Attributes: Klinický předmět; Zubní lékařství
• Pre-requisite : B81140, B81145, B81152, B81405
• Is pre-requisite for: B81143, B82684, B82683, B81177, B81176
• Is interchangeable with: B83153

Aim of the course

Last update: prof. MUDr. Jarmila Procházková, CSc. (27.09.2019)

The aim is to obtain theoretical and practical knowledge of prosthetic dentistry -examination of the patient, treatment plan of prosthetic rehabilitation, preprosthetic adjustment of teeth and jaws, treatment with fixed and removable dentures. Types of dental defects and basic types of dentures. Crown and bridge reconstructions, removable partial and complete dentures. Prosthetic materials. Interdisciplinary cooperation and preventive aspects of prosthetic dentistry.

Syllabus

Last update: doc. MUDr. Hana Hubálková, Ph.D. (26.10.2018)

Regulation for credits - prosthodontic subjects

Prosthodontics in Dental Medicine 2

1) Participation in practices - two absences tolerated per semester (sikness - confirmated by doctor, exeptional situation)

2) Participation in seminars - two absences tolerated per semester (sikness - confirmated by doctor, exeptional situation)

3) Passing a credit test, min 65% of correct answers plus interview with a teacher

4) Max. two oral exam corrections if failing the test

 

 

 

Praktická výuka ZL  5. 4. 3. ročník   +  4. ter.   2018 / 2019

v. týden

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

p

p

p

p

1

2

3

4

5

6

7

8

9

10

11

12

13

14

15

dd

1

8

15

22

29

5

12

19

26

3

10

17

31

7

14

21

28

4

11

18

25

4

11

18

25

1

8

15

23

29

6

13

20

27

mm

10

11

12

1

2

3

SRZK

4 vel

Vel SRZK

Vel

sv

5 sv

dě

B

B

B

C

C

C

D

D

D

E

E

E

Orto

B

E

C

D

Ch-

C

C

C

B

B

B

E

E

E

D

D

D

Σ

B

B

B

B

B

B

B

B

B

B

B

B

B

Σ

C

C

C

C

C

C

C

C

C

C

C

C

C

Σ

D

D

D

D

D

D

D

D

D

D

D

D

D

Σ

E

E

E

E

E

E

E

E

E

E

E

E

A

Ch

Ch

Ch

Dě

Dě

Dě

O      MP

Σ

Σ

Σ

Σ

Σ

Σ

Σ

Σ

Σ

Σ

Σ

Σ

4. ZL

4B

4C

4D

4E

AP

3. ZL  2018/2019                                  1          2        3        4        5       6        7        8       9        10        11       12        13       14        15                                1.10.     8.10.   15.10.  22.10.  29.10.   5.11.  12.11.  19.11.  26.11.    3.12.     10.12.  17.12.      31.12.      7.1.      14.1.

P

Po

ABC

A

A

A

A

A

-

P

St

B

B

B

B

B

B

P

Čt

C

C

C

C

C

C

L

Po

C1

C1

C2

B1

B2

B2

_

A2

A2

L

St

C1

C2

C2

B1

B2

A1

A1

A2

_

L

Čt

C1

C2

B1

B1

B2

A1

A1

A2

_

F

Po

A1

A1

A2

B2

B1

B1

_

C2

C2

F

St

A1

A2

A2

B2

B1

C1

C1

C2

_

F

Čt

A1

A2

B2

B2

B1

C1

C1

C2

_

AP

Pá

P

P

P

P

P

P

L/F

L/F

L/F

F/L

_

F/L

F/L

F/L

4. ročník terapeutický směr

4. t.

4

6

A4

A3

A1

A2

8

14

9

10

12

13

5

15

16

3

7

2

11

1

3.r. ZL+AP

P - protetika                                                              Po       13:00 - 15:30

F - fantomová laboratoř                                               St        13:00-14:00 přednáška; 14:00 - 16:00

L - výuková laboratoř                                                  Čt        14:00 - 15:30

                                                                              Pá AP      8.00 - 8.30 seminář; 8.30 - 11.45 praktika; 12.00 - 13.00 přednáška

 

 

 

                          Prosthetic Dentistry

 3rd year                                               Winter semestr  2018/2019

                       Lectures

Friday: 12.00 – 13.00 (start 5. 10. 2016)

Room: Seminary room, Kateřinská 32, 2nd floor

Lecturers: Doc. MUDr. H. Hubálková, Ph.D.

                As. MUDr. J. Charvát, CSc.

Themes:  

 

 1)   Char. Kennedy classification I - IV.

 2)  Char. Classification of dental defects, biologic quality of teeth and dentition.                                

 3)  Hub. Examination of the patient – planning of removable partial dentures (RPD).

 4)  Char. RPD with cast metal framework – clasp system.

 5)  Hub.  Materials used for RPD – metals, alloys, plastics, ceramics.

               Study models – analysis, surveyor.

 6) Char.  RPD with cast metal framework – types of attachments.

 7) Char.  Overdenture – teeth-born and implant-born.

 8) Char.  RPD – chairside working procedures.

 9)  Hub.  Preparation of teeth and jaws, before prosthetic treatment.

               Acrylic denture, immediate denture.

11) Char.  RPD – laboratory working procedures.

11) Hub.   Impression materials and technics for RPDs.

 12) Char.  CAD/CAM technologies – sintering, printing

 13) Hub.  Summary – TEST.

 

        

          

           Themes processed H. Hubálková and J. Charvát      

 

Seminars

	3 AP 2018-19
5.10.2018	Rules of practicals in the lecture hall, Impression materials	P
12.10.2018	Preventive aspects of prosthetic treatment	P
19.10.2018	Dental plastics and ceramics	P
2.11.2018	Preprosthodontic treatment - postendodontic treatment	P
9.11.2018	Voldřich and Kennedy classifications	P
16.11.2018	Dental alloys	P
23.11.2018	Treatment planning of RPDs, surveyor	L
30.11.2018	RPD with bonded saddles and free end saddles	L
7.12.2018	Types of dentures and overdentures	L
14.12.2018	RPD - construction elements	F
4.1.2019	RPDs - Chairside  working procedures	F
11.1.2019	RPDs - Laboratory working procedures	F
18.1.2019	CAD/CAM systems in fixed and removable prosthodontics	F
	Výukové sály   P
	Výuková laboratoř    L
	Fantomová laboratoř    F

 

	Teaching laboratory
	Themes
1	Temporary crown - wax model
2	Temporary crown - flasking and polymerisation
3	Temporary crown - finishing, polishing
4	Temporary bridge - wax model
5	Repair of removable denture
6	RPD  3rd class - wire clasps, arrangement of teeth

 

	Phantom laboratory
	Themes
1.	Preparation of molar 46 for  full cast metal- ceramic crown
2.	Preparation of anterior tooth 23 for ceramic crown
3.	Preparation of anterior tooth 22 (12) for ceramic crown
4.	Temporary crown  22 (12). Die method.
5.	Preparation of anterior teeth 21 for ceramic crown
6.	Preparation of distal teeth 24 for metal crown

Literature

Last update: doc. MUDr. Hana Hubálková, Ph.D. (06.02.2014)

Anusavice KJ:  Phillips' Science of Dental Materials. 12 ed., Elsevier, 2012

Craig RG: Restorative dental materials. 13 ed., Mosby, 2011

McCabe JF: Applied dental materials. 9 ed., Blackwell Scientific Publ., 2008

Hammerle C: Dental Ceramics: Essential Aspects for Clinical Practice. Quintessence, 2009

Chiche GJ: Smile Design: A Guide For Clinician, Ceramist, and Patient. Quintessence, 2004  

Carr  AB: McCracken's Removable Partial Prosthodontics , 12 ed., Mosby, 2010

Shillingburg HT: Fundamentals of Fixed Prosthodontics, 4 ed., Quintessence, 2012

Zarb GA: Prosthodontic Treatment for Edentulous Patients: Complete Dentures and Implant-Supported Prostheses, 13 ed., Elsevier, 2012

Tyson K. Yemm R., Scott B.: Understanding partial denture design. 1 ed., Oxford University Press, Oxford, 2007

Mitchell L, Mitchell DA: Oxford handbook of clinical dentistry. Last ed, Oxford University Press, Oxford

Teaching methods

Last update: prof. MUDr. Jarmila Procházková, CSc. (27.09.2019)

Practicals start on 4 Oct 2019 at 8 a.m. in the lecture hall 2nd , Kateřinská 32 with the hygienic lecture.

1. Fixed dental prostheses with vertical preparation - advantages and 
   disadvantages.
2. Contemporary fixed prostheses, principles of tooth preparation, advantages and disadvantages of ultrasonic preparation and laser preparation.
3. Monolitic fixed restorations - materials, CAD/CAM procedures.
4. Mechanical and aesthetic properties of different CAD/CAM ceramic materials.
5. Complete dentures, new technology. Intraoral scanner for complete dentures.
6. Esthetic evaluation of shape, size and colour of artificial teeth.
7. Fiber/glass/ceramic posts - properties and clinical indications.
8. Fracture of ceramics - causes, prevention.
9. Luting materials - types, indications, working procedures.
10. PEEK - properties, clinical indications, manufacturing methods.
11. 3D printing in the dental practice.
12. Digital, conventional or hybrid workflow for fixed prosthodontics.
13. Digitization in removable prosthodontics, facial scanning, new shape of clasp, CAD, the role of the dentist.
14. Overdenture tooth and implant-born. Periodontal receptors.
15. Digitization in dental implantology, span of life of the prosthetic treatment on implants.
16. Postoperative care in RPDs, complete dentures, overdentures.
17. Contemporary design of telescope and conus crowns as retainers for partial removable denture prostheses.
18. Diagnostic appointment, different treatment plan and its modification by budget plan, overtreatment.
19. Modern workflow in intermaxillary relationship determination and its influence on the preciseness of the produced denture, consequences of errors when they are inaccurately established.
20. Contraindications of metals in prosthodontics. Non-metallic prosthetic systems and possibilities of complete non-metallic teeth reconstruction.

Course completion requirements

Last update: prof. MUDr. Jarmila Procházková, CSc. (27.09.2019)

Conditions for getting credits

1. Compulsory attendance at the clerkships and seminars,

2. Sucessfull test passing,

3. if the test passing failed final oral examination are requested.

4. The assey on the assigned thema submit the 1 week of December.

Requirements to the exam

Last update: doc. MUDr. Hana Hubálková, Ph.D. (29.11.2019)

Regulation for credits - prosthodontic subjects

Prosthodontics in Dental Medicine 2

1) Participation in practices - two absences tolerated per semester (sikness - confirmated by doctor, exeptional situation)

2) Participation in seminars - two absences tolerated per semester (sikness - confirmated by doctor, exeptional situation)

3) Passing a credit test, min 65% of correct answers plus interview with a teacher

4) Max. two oral exam corrections if failing the test

 Esseys:

Prosthetic Dentistry
Essays 3rd year 2019/20
Aesthetics in dentistry - principles of harmony	Berghammer, Shahbaz
Colours in oral cavity - systems, principles	Boudaka, Shahin
Colours in oral cavity - chairside procedures in shades selection	Elbis, Siddiq
Ceramic materials - types, properties	Haji, Suliman
Ceramic materials- indications and technology	Iman, Taghavi
Metals in dentistry - types, properties	Ionis, Yaghmaei
Metals in dentistry - indications and technology	Kim, Yuthpattanaporn
Plastic materials - types, properties	Kousteni ,Capponi
Plastic materials - indication and technology	Kuo, Rivier
Luting materials and procedures	Mostafavi, Sallet
Adhesive technology	Murshed, Sild
Biologic aspects of dental materials	Sbampato
Note: Five printed pages, 4 references, font size 10, line spacing 11  plus mail delivery to [e-mail]
Citation of literature sources
Deadline - 13.12.2019

 Seminars:

29.11.2019 start 7.30am, laboratory room, 3.020, prezentation

Murshed(Kim)

                  8.00am groupe A,room 3.020,groupe B Phantom lab, Karlovo nám.32.

 

6.12.2019 start 7.30am, room 3.020, prezentation Taghavi(Suliman)

                 8.00am groupe A,room 3.020,groupe B Phantom lab, Karlovo nám.32.

 

13.12.2019 start 8.00am,Teaching hall, 2.021

 

20.12.2019 Sanitary day

 

10.1.2020 start 7.30am, laboratory room, 3.020, prezentation

Siddiq(Iman)

                 8.00am groupe B,room 3.020,groupe A Phantom lab, Karlovo nám.32.

 

17.1.2020 start 7.30am, laboratory room, 3.020, prezentation

Sbampato(Boudaka)

                 8.00am groupe B,room 3.020,groupe A Phantom lab, Karlovo nám.32.

 

24.1.2020 start 7.30am, laboratory room, 3.020, prezentation

Mustafavi(Kuo)

                 8.00am groupe B,room 3.020,groupe A Phantom lab, Karlovo nám.32.

 

                Credit test

Sylabus

	Teaching laboratory
	Theme
1.	Modelation and polymeration of full resin crown
2.	Finisching of resin crown
3.	Wax modelation of temporary bridge
4.	Repair of removable denture

 

 

 

 

 

 

 

 

 

 

 

 

	Phantom laboratory
	Theme
1.	Preparation of molar for metal- ceramic crown
2.	Preparation of central incisor for ceramic crown
3.	Preparation of lateral incisor for ceramic crown Or  preparation premolar for anchoring crown (metal ceramic)
4.	Temporary crown  for laterar incisor or premolar. Die method.