Tryskové plazmatické systémy - experiment a model
Plasma-jet systems - experiment and model
Tryskové plazmatické systémy - experiment a model
diplomová práce (OBHÁJENO)
Zobrazit/ otevřít
Trvalý odkaz
http://hdl.handle.net/20.500.11956/30643Identifikátory
SIS: 63496
Kolekce
- Kvalifikační práce [10693]
Autor
Vedoucí práce
Konzultant práce
Tichý, Milan
Oponent práce
Hubička, Zdeněk
Fakulta / součást
Matematicko-fyzikální fakulta
Obor
Fyzika povrchů a ionizovaných prostředí
Katedra / ústav / klinika
Katedra fyziky povrchů a plazmatu
Datum obhajoby
17. 5. 2010
Nakladatel
Univerzita Karlova, Matematicko-fyzikální fakultaJazyk
Slovenština
Známka
Výborně
V predloženej práci skúmame prúdenie pracovného plynu systémom s plazmatickou tryskou. V práci je popísaný základný princíp výboja v dutej katóde a jeho technologické využitie, najmä pre potreby nanášania tenkých vrstiev. Jedným z dôležitých parametrov pri nanášaní je rýchlosť, s akou sa pohybuje pracovný plyn a s ním rozprášený materiál terča smerom k substrátu. Kvôli presnosti a reprodukovateľnosti experimentov je nutné poznať vzťahy medzi prúdením pracovného plynu a vonkajšími parametrami experimentu, ako je napríklad prúd pracovného plynu a tlak v komore. Pre tieto účely boli spravené merania rýchlosti iónov pomocou Langmuirovej elektrostatickej sondy pri pulznom pracovnom režime trysky. Namerané údaje sú porovnané s počítačovým modelom, ktorý bol vyvinutý v rámci tejto práce. Tento model popisuje prúdenie pracovného plynu numerickým riešením Navier-Stokesovej rovnice pre stlačiteľné newtonovské tekutiny. Model je porovnaný s publikovanými výsledkami popisujúcimi prúdenie v dutej katóde, pričom je preukázateľná zhoda výsledkov. Výstup modelu ale dáva rozdielne výsledky v porovnaní s nameranými údajmi, ktoré pochádzajú z oblasti mimo katódu. Súčasťou popisu modelu je diskusia závislosti prúdenia na teplote.
In the present work we study the ow of working gas through a plasmajet system. In this work we describe the basic principle of hollow cathode discharge and its use for technological applications, mainly for thin layers coating. One of the important parameters during the deposition is the speed of the working gas ow and with it the sputtered target material towards the substrate. Because of the reproducibility and precision of the experiments it is important to know the relation between the working gas ow and external parameters of the experiment, e.g. ow of the gas and the pressure in the chamber. This is the reason why measurements of ions velocity using Langmuire electrostatic probe and pulse regime of plasmajet were done. Measured data are compared with a computer model, which was developed in this work. This model describes the ow of the working gas by solving Navier-Stokes equation for compressible Newtonian uids. The results of this model are compared with results from the paper describing the ow through the hollow cathode. It shows good agreement inside the cathode. The model is giving dierent results when comparing to measured data which are from the area outside the cathode. Part of the model description is a discussion of the temperature dependence of the ow.